Filter
Top Products
System Setup Program A-3
Table A-1. System Setup Categories
Category
Function
Time Resets time on system’s internal clock.
Date Resets date on system’s internal calendar.
Diskette Drive A
Diskette Drive B
Identifies type of diskette drives installed. Cat-
egory options always match physical locations
of drives in system unit. Tape drives are not
reflected in these categories.
Drive A Location Identifies which diskette drive is used as the
boot drive.
Drives:
Primary
Secondary
Identifies drives attached to the IDE1 and
IDE2 connectors on system board. Each EIDE
connector supports two EIDE drives (Drive 0
and Drive 1).
For EIDE hard-disk drives, the system pro-
vides an automatic drive-type detect feature.
To use this feature, highlight the appropriate
drive category and type a (for automatic).
If none of the supported drive types match the
parameters of the new drive, enter the parame-
ters directly. To do so, highlight the
appropriate drive category (Drive 0 and Drive 1)
and type u to display User1. Press <Tab> to
highlight each of the parameter fields in suc-
cession, and enter the appropriate number for
each field.
NOTE: For EIDE devices such as EIDE
CD-ROM drives and EIDE tape drives that are
using the built-in EIDE controller, set the
appropriate Drive category to Auto.
Base Memory Displays amount of memory available to
MS-DOS programs that do not use extended or
expanded memory.
Extended Memory Displays amount of memory available as
extended memory.