Filter
Top Products
4-12 Dell OptiPlex GX
pro
Systems Service Manual
Hard-Disk Drives
Figure 4-11. Hard-Disk Drive Bracket Removal
To remove a hard-disk drive bracket, follow these steps:
1. Disconnect the DC power cable(s) and the interface cable(s) from the
back of the drive(s).
2. Remove the screw that secures the hard-disk drive bracket to the
chassis.
3. Grasp the handle on the front of the bracket, and rotate the bracket
back until it swings free from the chassis.
Disengage the bracket from the two hooks on the bottom of the chassis
support.
4. Lift the hard-disk drive bracket out of the system unit.
handle
screw
hook (2)
hard-disk drive
bracket