Dell 100-Mbps Network Card User Manual


 
Removing and Replacing Parts 4-5
E
ject, Power, and Reset Buttons
Figure 4-4. Eject, Power, and Reset Button Removal
To remove the eject, power, and reset buttons, follow these steps:
1. Lay the system unit cover upside down on a flat work surface, with the
back of the cover facing you.
2. To remove the 3.5-inch diskette-drive eject button, pull gently on the
plastic part of the button until it comes free.
3. To remove the power button or the reset button, use a small screw-
driver and push in on the two or three plastic clips that hold the button
to the system unit cover. When these clips are released, the button
comes free from the front panel of the cover.
power button
reset button
system unit cover
(upside down)
3.5-inch front-
panel insert
eject button