Filter
Top Products
Table 2-4.RedundantPowerSupplyIndicators
Hard-Drive Indicator Codes
Each hard-drive carrier has two indicators: a busy indicator and a status indicator (see Figure2-6). The indicators provide information on the status of the
respective hard drive.
Figure 2-6. Hard-Drive Indicators
Table2-5 lists the drive status indicator codes. Different codes display as drive events occur in the system. For example, in the event of a hard-drive failure,
the "drive fail" code appears. After the drive is selected for removal, the "preparing for removal" code appears. After the replacement drive is installed, the
"preparing for operation, drive online" code appears.
The drive-busy indicator signifies whether the hard drive is active on the SCSI bus. This indicator is controlled by the hard drive.
Table 2-5. Hard-DriveStatusIndicatorCodes
NIC Indicator Codes
The NIC on the back panel has an indicator that provides information on network activity and link status (see Figure2-7). Table2-6 lists the NIC indicator
codes.
Figure 2-7. NIC Indicators
Indicator
Function
Power supply status
Green indicates that the power supply is operational.
Power supply fault
Amber indicates a problem with the power supply.
AC line status
Green indicates that a valid AC source is connected to the power supply.
Drive-Status Indicator
Indicator Code
Drive bay empty
Off
Drive being prepared for operation, drive online
Steady green
Drive being identified, prepared for removal, or drive offline
Blinks green three times per second at equal intervals
Drive rebuilding
Blinks green once per second
Drive failed
Steady amber