Filter
Top Products
Removing and Replacing Parts on the Mini Tower Chassis 5-21
([SDQVLRQ&DUGV
There are seven expansion-card connectors on the system board (see
Figure 5-18). Expansion-card connectors PCI1 through PCI5 support 32-bit PCI
expansion cards; expansion-card connector AGP supports a 32-bit AGP expan-
sion card; and expansion-card connector ISA1 can accommodate an 8- or 16-bit
ISA expansion card.
NOTES: Connector ISA1 shares expansion-card slot space with connector
PCI5. Therefore, only one card of either type can be installed in this slot.
PCI4 has a connector extension to support a PCI RAID controller (see
Figure 5-17 for the location of the PCI connectors).
Follow this general procedure to remove an expansion card:
expansion card
card-edge
connector
expansion-card
connectors (7)
mounting bracket
screw