Filter
Top Products
Removing and Replacing Parts on the Mini Tower Chassis 5-1
&+$37(5
5HPRYLQJDQG5HSODFLQJ3DUWVRQ
WKH0LQL7RZHU&KDVVLV
This chapter provides procedures for removing the components, assemblies,
and subassemblies in the Dell Precision 410 mini tower systems. If you are
servicing a Dell Precision 410 desktop system, refer to Chapter 4, “Removing
and Replacing Parts on the Desktop Chassis.”
Unless otherwise noted, each procedure assumes the following:
You have performed the steps in “Precautionary Measures” found later in
this chapter.
You have removed the computer cover.
You can replace or reinstall a part by performing the removal procedure in
reverse order unless additional information is provided.
5HFRPPHQGHG7RROV
Most of the procedures in this chapter require the use of one or more of the
following tools:
Small flat-blade screwdriver
Wide flat-blade screwdriver
#1 and #2 Phillips-head screwdrivers
1/4
-inch nutdriver
Tweezers or long-nose pliers
Also, use a wrist grounding strap as explained in the next section, “Precaution-
ary Measures.”