Filter
Top Products
1-2 Dell Precision 410 Systems Service Manual
6\VWHP)HDWXUHV
The system includes the following features:
Dual-processor capability
Advanced combination PCI expansion and ISA subsystem
Plug and Play capability
Enhanced dual-interface enhanced integrated drive electronics (EIDE)
subsystem
SCSI support using two integrated SCSI channels
— The primary (Adaptec AIC-7890) channel provides Ultra2/Wide low-
voltage differential (LVD) (80-MB/sec) support for high-performance
SCSI hard-disk drives and an optional redundant array of inexpensive
disks (RAID) subsystem.
— The secondary (Adaptec AIC-7880) channel provides internal Ultra/
Narrow and external Ultra/Wide (40-MB/sec) support for SCSI CD-ROM
and tape drives, optical drives, scanners, and so forth.
16-bit integrated 3D audio controller
AGP or PCI graphics adapter card with one AGP expansion slot
Integrated 10/100-Mbps 3Com
®
PCI Ethernet network interface controller
(NIC) with Wakeup On LAN support
Integrated universal serial bus (USB) controller
Thermal sensors to shut down the system if it overheats
Main system memory consisting of 64 MB to 512 MB of unbuffered
SDRAM
DIMMs, or up to 1024 MB of registered SDRAM DIMMs
Secondary cache of 512 KB of SRAM in the single-edge contact (SEC) car-
tridge providing ECC capability
Self-Monitoring Analysis and Reporting Technology (SMART)-compliant
EIDE hard-disk drives and SMART support in the system BIOS, which
warns you at system start-up if an EIDE hard-disk drive has become
unreliable
For a complete list of system features, see “Technical Specifications,” found
later in this chapter.
When following the procedures in this manual, assume that the location or
direction relative to the computers is as shown in Figure 1-1.