Filter
Top Products
Basic Troubleshooting 2-3
Does the inspection reveal any problems?
Ye s
. Proceed to the appropriate procedure in Chapter 4, “Removing and
Replacing Parts on the Desktop Chassis.”
No
. Proceed to the next section, “Observing the Boot Routine.”
2EVHUYLQJWKH%RRW5RXWLQH
After you have performed an external visual inspection as described in the pre-
vious section, you should boot the system and, while the boot routine is
running, observe the system for any indications of problems.
NOTE: Most of the steps in this procedure require observation of system func-
tions and indications, some of which can occur simultaneously. It may be
necessary to reboot the system several times in order to complete all of these
steps.
To observe problem indications during the boot routine, follow these steps:
Does the fan run normally?
Ye s .
Proceed to step 3.
No.
Troubleshoot the computer’s power supply.
Do these indicators flash on and off within approximately 10 seconds after
the boot routine starts?
Ye s .
Proceed to step 4.
No.
Troubleshoot the system power supply. If the troubleshooting pro-
cedure indicates that the system power supply is operational, troubleshoot
the memory.