Filter
Top Products
3-18 Dell PowerEdge 4350 Systems Users Guide
17. Insert the backup copy of the IntranetWare 4.11 SCSI and RAID driver diskette
into the diskette drive and press <Enter> to continue. A list of drivers on the dis-
kette appears.
NOTE: If you have not already created this diskette, refer to the Dell OpenManage
Server Assistant
CD.
18. Select the aic78u2.ham driver and press <Enter>. The driver is copied to the
hard-disk drive.
NOTES: Specific help text for each driver appears in the middle of the screen as
you scroll down the list. The
Loaded Drivers
window below the list of available
drivers displays the names of drivers that are loaded and operational. For a new
installation, this list is initially empty. For a selective installation, the list shows
the drivers already running.
If you have two controllers that use the same driver, such as two Adaptec
AIC-7890 host adapters, you must load the same driver twiceonce for each
controller.
19. At the Save existing file Y/N prompt, type
\
or
Q
as necessary and press
<Enter>.
20. Press <Alt><Esc> to switch to the console prompt, type
ORDG
D?DLFXKDP
, and press <Enter>. A list of slot numbers separated by
commas is displayed.
21. Write down all supported slot numbers listed and press <Esc> to clear the com-
mand line. Press <Alt><Esc> to return to the installation screen.
22. Select the field for the slot number, type the slot number for the driver, and press
<Enter>.
23. Select Save parameters and continue, and then press <Enter>.
24. When prompted to select an additional disk driver, select Yes and press <Enter>.
25. Repeat steps 18 through 24 for the aha2940.ham driver.
NOTE: If you have a RAID controller installed, you may have a RAID driver dis-
kette included with your shipment. If so, return to step 17 and use that diskette
as the source of your RAID driver. If not, repeat steps 18 through 24 for the
pedge4x.ham
driver, as well.
26. When prompted to select an additional disk driver, select No and press <Enter>.
You now need to install the appropriate network adapter driver.
27. From the Additional Driver Actions menu, select Continue Installation and
press <Enter>.
The Network (LAN) Driver box is highlighted.
3502Ebk0.book Page 18 Friday, November 13, 1998 10:00 AM