Filter
Top Products
3-20 Dell PowerEdge 4350 Systems Users Guide
'HOO3URYLGHG,QWUDQHW:DUH
If you purchased IntranetWare from Dell, the required Novell patches (including the lat-
est revision of the IntranetWare Support Pack recommended by Dell) are provided on
the
Dell IntranetWare Support
CD.
To install the patches supplied on the
Dell IntranetWare Support
CD, follow these
steps:
1. Start IntranetWare.
2. Insert the
Dell IntranetWare Support
CD into the servers CD-ROM drive.
3. At the console prompt, type
ORDGFGURP
and press <Enter>.
4. Type
FGPRXQWQZVFG
and press <Enter>.
5. Type
QZVFG?GSDWFK
and press <Enter>.
A menu lists several patches (including the IntranetWare Support Pack 5), a
backup option for the files being replaced by the IntranetWare Support Pack 5,
and a reboot option.
Dell recommends that you accept the defaults as displayed.
6. Read the list of options and press <F10> to accept them.
The program copies files to your hard-disk drive.
7. At the message
,QWUDQHW:DUH6XSSRUW3DFNDJHLQVWDOODWLRQLV
FRPSOHWH
, press <Enter>.
8. At the console prompt, type
GRZQ
and press <Enter> to return to downed
server mode.
9. At the console prompt, type
H[LW
to return to the MS-DOS prompt.
10. Remove the
Dell IntranetWare Support
CD.
11. Reboot the server.
,QWUDQHW:DUH)URP6RXUFHV2WKHU7KDQ'HOO
If you purchased IntranetWare 4.11 from a source other than Dell, you must apply the
IntranetWare Support Pack version 4 or later before IntranetWare SMP can be
installed.
The current IntranetWare Support Pack is version 5 and is an MS-DOSexecutable patch
file (iwsp5b.exe) available for download from Novells World Wide Web site at
www.novell.com. For complete instructions on applying IntranetWare Support Pack 5,
refer to the Novell documentation.
To install the IntranetWare Support Pack 5, follow these steps:
1. Start IntranetWare.
2. Load the Support Pack file onto a workstation that is attached to the PowerEdge
server.
3502Ebk0.book Page 20 Friday, November 13, 1998 10:00 AM