Filter
Top Products
4-6 Dell PowerEdge 4350 Systems Users Guide
5HVHUYHG0HPRU\
Reserved Memory allows you to designate a region of system board memory that
can be supplied by an expansion card. You should not enable the reserved memory
feature unless you are using an expansion card that requires special addressing.
For example, you may have a memory expansion card that needs to be addressed
starting at 15 megabytes (MB). Selecting the 15M - 16M setting for Reserved Mem-
ory specifies that the base memory from 15 to 16 MB comes from the memory
expansion card (the base memory below the 15-MB address comes from the dual-in-
line memory modules [DIMMs] on the system board).
Reserved Memory has the following settings:
None (the default)
15M - 16M
&386SHHG
CPU Speed indicates the processor speed at which your system boots.
Press the left- or right-arrow key to toggle CPU Speed between the resident micro-
processors rated speed (the default) and a lower speed. This feature should not be
used under normal operations.
1XP/RFN
Num Lock determines whether your system boots with the Num Lock mode acti-
vated on 101- or 102-key keyboards (it does not apply to 84-key keyboards).
When Num Lock mode is activated, the rightmost bank of keys on your keyboard pro-
vides the mathematical and numeric functions shown at the tops of the keys. When
Num Lock mode is turned off, these keys provide cursor-control functions according to
the label on the bottom of each key.
3URFHVVRUDQG3URFHVVRU
Processor 1 and Processor 2 display the version or stepping number of each proces-
sor slot in the system. These options have no user-selectable settings.
)DQ6SHHG
Fan Speed has the following settings:
Full Speed (the default) provides maximum cooling.
Noise Reduced enables quiet-mode operation.
3502Ebk0.book Page 6 Friday, November 13, 1998 10:00 AM