Filter
Top Products
Using the Resource Configuration Utility 5-5
To select a category on the list of system board options, press the up- or down-arrow
key to highlight the category and press <Enter>. A pop-up menu appears, listing the
options for that category. To select an option, press the up- or down-arrow key to
highlight the option and press <Enter>.
NOTES: Several system board categories allow you to edit such resources as memory
address, I/O ports, interrupt requests (IRQ), and direct memory access (DMA) chan-
nels. It may be necessary to edit these resources to resolve a configuration conflict.
To view the resource screen for any device, highlight the option and press <F6>.
The edit resources feature is intended for users who are technically knowledgeable.
Do not change resource settings from their defaults if you do not understand how
such a change will affect system performance.
While in the
Step 3: View or Edit Details
menu, you can press <F7> to enter the
Advanced
menu. See Advanced Menu found later in this chapter for more
information.
When you have finished making changes, save the new system configuration informa-
tion and exit the utility as follows:
1. Press <F10>, and select Step 5: Save and Exit from the Steps in Configuring
Your Computer menu.
2. Select Save the Configuration and Restart the Computer from the menu that
appears.
)LJXUH9LHZRU(GLW'HWDLOV6FUHHQ([DPSOH
RS-232 COM Port 1 IRQ 4 PORT 3F8h-3FFh
RS-232 COM Port 2 IRQ 3 PORT 2F8h-2FFh
Parallel Port IRQ 7 PORT 378h-37Fh
Floppy Controller Enabled
Mouse Controller Enabled
Embedded - Adaptec AIC-7890 SCSI Ctrlr
PCI Function 1 Enabled
Embedded - Adaptec AIC-7860 SCSI Ctrlr
PCI Function 1 Enabled
Embedded - PCI VGA Controller
PCI Function 1 Enabled
Standard VGA Resources Enabled
System - Dell System PowerEdge 4350
3502Ebk0.book Page 5 Friday, November 13, 1998 10:00 AM