Filter
Top Products
5-6 Dell PowerEdge 4350 Systems Users Guide
6WHS([DPLQH6ZLWFKHVRU3ULQW5HSRUW
The Step 4: Examine Switches or Print Report option lists the required switch and
jumper settings for each expansion card in your computer. To view the settings, high-
light the card and press <Enter>. Press <F7> to make a copy of or print the settings.
If your computer is attached to a printer, you can print out the information or copy it to
a file.
6WHS6DYHDQG([LW
The Step 5: Save and Exit option allows you to save or cancel the configuration
changes you have made. When you select this option, follow the directions on the
menu that appears.
If you save your changes
, the utility saves the new configuration in your systems
NVRAM and in a file on your RCU diskette. Then, the utility automatically reboots your
system.
If you cancel your changes
, you can remain in the utility to make other changes or exit
the utility without saving any changes.
6HW'DWH
Set date allows you to set or change the computer date. Type the new date and press
<Enter> to store it or <Esc> to cancel the change. The format is
PPGG\\\\
.
6HW7LPH
Set time allows you to set or change the computer time. Type the new time and
press <Enter> to store it or <Esc> to cancel the change. The format is
KKPPVV
0DLQWDLQ5HVRXUFH&RQILJXUDWLRQ'LVNHWWH
Using the Maintain Resource Configuration Diskette option, you can create a
backup copy of the system configuration information (.sci) file or use a previously
saved .sci file to reconfigure your system or to identically configure many other sys-
tems. You can also copy, update, or delete .sci or .cfg files from your RCU diskette or
the configuration diskette(s) for any hardware option.
([LW)URP7KLV8WLOLW\
The Exit From This Utility option allows you to exit from the RCU and reboot your
computer system.
$GYDQFHG0HQX
The Advanced menu lets you lock or unlock cards in a configuration, view detailed
information about the system, and maintain .sci files.
3502Ebk0.book Page 6 Friday, November 13, 1998 10:00 AM