Filter
Top Products
Using the Resource Configuration Utility 5-9
5 HPRYLQJD&DUGWKDW&RQIOLFWV:LWKWKH&DUG<RX-XVW
,QVWDOOHG
If there is a resource conflict between two ISA expansion cards and you want to
remove the card that conflicts with the one you just installed, use the following
procedure:
1. From the Steps in Configuring Your Computer menu, select Step 2: Add or
Remove Boards and press <Enter>.
From the list of expansion slots and cards, select the card in conflict with the one
installed, and press <Del>. When the utility asks you to confirm your command,
press <Enter>. Then, press <Esc> to return to the Steps in Configuring Your
Computer menu.
2. Select Step 5: Save and Exit, and press <Enter>.
3. Select Save the Configuration and Restart the Computer, and press <Enter>.
The system reboots with the new system configuration information.
4. If you deleted an expansion-card configuration file from the previously saved sys-
tem configuration information, remove the card from your computer.
For information on removing the expansion card, see Removing an Expansion
Card in Chapter 8 of the
Installation and Troubleshooting Guide
.
3502Ebk0.book Page 9 Friday, November 13, 1998 10:00 AM