Filter
Top Products
Installing System Components 101
5
Disconnect the LED signal cable from the front panel connector on the
system board. See Figure 5-3.
6
Remove the screw securing the LED panel cover to the chassis and slide
the cover out. See Figure 3-25.
7
Remove the two screws securing the control panel assembly to the chassis.
See Figure 3-25.
8
Remove the control panel assembly.
Figure 3-25. Removing the Control Panel Assembly
1 cable cover 2 chassis
3 front LED board 4 screws (3)
5 front LED cover
2
4
5
3
1
book.book Page 101 Friday, November 8, 2013 11:29 AM