Filter
Top Products
90 Installing System Components
Installing the Mezzanine Card (10 GbE LAN)
CAUTION: Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1
If you are installing a mezzanine card for the first time, remove the
two screws securing the mezzanine-card cover and remove the cover.
See Figure 3-19.
2
Install a label bracket that has slots for connecting the mezzanine cards.
3
Align the spacer pins on the mezzanine card with the holes on the system
board.
NOTE: The three spacer pins must be inserted through the board for proper
installation of the mezzanine card.
4
Secure the board using the screw. See Figure 3-19.
5
Replace the expansion-card riser assembly. See "Installing the Expansion-
Card Riser" on page 77.
6
Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 61.
7
Replace the system cover. See "Closing the System" on page 59.
8
Reconnect the system and peripherals to their electrical outlets, and turn
on the system.
book.book Page 90 Friday, November 8, 2013 11:29 AM