Filter
Top Products
Installing System Components 77
Figure 3-13. Removing and Installing the Expansion-Card Riser
Installing the Expansion-Card Riser
CAUTION: Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1
Replace the expansion-card riser in the expansion-card riser assembly and
secure it using the four screws. See Figure 3-13.
2
Align the expansion-card riser assembly with the connector on the system
board. See Figure 3-12.
3
Seat the expansion-card riser assembly firmly on the system board.
4
Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 61.
1 expansion-card riser assembly 2 expansion-card riser
3 screws (4)
3
2
1
book.book Page 77 Friday, November 8, 2013 11:29 AM