Filter
Top Products
44 Using the System Setup Program
PCI-E SLOT Option
Rom (Enabled default)
Enables or disables add-on card option ROM.
PCI-E Connector Option
Rom (Enabled default)
Enables or disables board to board PCI-E connector
option ROM.
NIC1 Mac Address Displays the NIC1 MAC address.
NIC2 Mac Address Displays the NIC2 MAC address.
Current QPI Frequency Displays the QPI frequency.
QPI Link Speed
(Full-Speed default)
Sets the QPI link speed.
QPI Frequency
(Auto default)
Sets the QPI frequency to
AUTO/4.800GT/5.866GT/6.400GT.
QPI L0s and L1
(Enabled default)
Enables or disables the QPI L0s and L1.
Crystal Beach / DMA
(Disabled default)
Enables or disables the Crystal Beach/DMA
configuration.
Intel VT-d
(Disabled default)
Enables or disables the Intel
®
Virtualization Technology
for Directed I/O.
SR-IOV Supported
(Disabled default)
Enables or disables SR-IOV support.
Active State Power
Management
(Disabled default)
Enables the individual serial Links in a PCI Express fabric
to be incrementally reduced as a Link becomes less active.
ME Support
(Enabled default)
Enables the Management Engine (ME) to allow for the
use of Intel AMT.
iSCSI Remote Boot Enable or disable onboard LAN to iSCSI.
Option Description
book.book Page 44 Friday, November 8, 2013 11:29 AM