Filter
Top Products
60 Installing System Components
Cooling Shroud
CAUTION: Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
Removing the Cooling Shroud
1
Turn off the system, including any attached peripherals, and disconnect
the system from its electrical outlet.
2
Open the system. See "Opening the System" on page 58.
3
If applicable, disconnect the internal hard drive cables.
4
Remove the four securing screws. See Figure 3-7.
5
Lift the cooling shroud out and away from the chassis. See Figure 3-7.
book.book Page 60 Friday, November 8, 2013 11:29 AM