Filter
Top Products
124 Removing and Installing Parts
Installing a Hard Drive
1
Follow the procedures in "Before You Begin" on page 97.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 99).
3
Check the documentation for the drive to verify that it is configured for
your computer.
4
Slide the hard drive into the hard drive bay.
5
Align the slots in the hard drive with the guides in the hard drive bay.
6
Replace and tighten the four screws to secure the hard drive.
7
Connect the power and data cables to the drive.
1 hard drive 2 power cable 3 serial ATA data cable
4 system board connector 5 screws (4)
2
4
3
1
5
book.book Page 124 Friday, April 4, 2008 12:10 PM