Filter
Top Products
Setting Up and Using Your Computer 37
Windows Vista has three main default power management modes:
• Balanced
• Power Saver
• High Performance
Dell has added a fourth, Dell-Recommended mode that sets power
management to the most typical settings for the majority of our customers.
This is the active Power Plan.
Standby Mode
Standby mode is the default "off" state for Windows Vista. Standby mode
conserves power by turning off the display and the hard drive after a time-out.
When the computer exits from standby mode, it returns to the operating
state it was in before it entered standby mode.
To set standby mode to automatically activate after a defined period of
inactivity:
1
Click
Start
and click
Control Pane
l.
2
Click
System and Maintenance
.
3
Under
System and Maintenance
, click
Power Options
.
The next dialog box will show three power plans - the top option is
Dell Recommended - this is the currently active plan.
There is also a show additional plans arrow underneath the three power
plans. You can have many power plans, but only three are displayed and the
top one is the active plan.
To immediately activate standby mode without a period of inactivity, click
Start
, then click the off button icon. Windows Vista sets Standby as the
default off state.
To exit from standby mode, press a key on the keyboard or move the mouse.
NOTICE: If your computer loses power while in standby mode, it may lose data.
Windows Vista has a new feature called Hybrid Sleep mode - this saves the data
into a file and also puts the system into standby. If you lose power, the system
retains your data on the hard drive and resumes to the same state you left it. Go to
Help and Support and search for Hybrid Sleep for further information. Hybrid Sleep
provides fast wake if the system is in standby, and also keeps your data safe by
storing it to the hard drive.
book.book Page 37 Friday, April 4, 2008 12:10 PM