Filter
Top Products
140 Removing and Installing Parts
10
Check all cable connections, and fold cables out of the way to avoid
blocking airflow between the fan and cooling vents.
11
Replace and tighten the two screws securing the CD or DVD drive.
12
Replace the bezel (see "Replacing the Bezel" on page 119).
13
Replace the computer cover (see "Replacing the Computer Cover" on page 164).
NOTICE: To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
14
Connect your computer and devices to their electrical outlets, and turn
them on.
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
1 CD or DVD drive 2 power cable 3 system board connector
4 data cable 5 second CD or DVD drive 6 screws (2)
7 screw slots (2)
1
2
4
3
6
5
7
book.book Page 140 Friday, April 4, 2008 12:10 PM