Filter
Top Products
Installing System Components 111
3
Open the system. See "Opening the System" on page 90.
4
Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 92.
5
Locate the memory module sockets. See Figure 6-1.
6
Remove the memory-module blanks from the sockets in which you plan to
install memory modules:
Press out the ejectors on each end of the socket until the memory-module
blank pops out of the socket. See Figure 3-13.
NOTE: Make sure to retain any removed memory-module blanks for future
use.
7
Handle each memory module only on either card edge, ensuring not to
touch the middle of the memory module.
Figure 3-13. Installing and Removing a Memory Module
1 memory module 2 memory module socket ejectors (2)
3 alignment key
2
1
3
book.book Page 111 Tuesday, June 9, 2009 4:09 PM