Denso BHT-7000 Scanner User Manual


 
viii
CAUTION
If you drop the BHT so as to damage its hous-
ing, immediately turn off the power, pull out
the dry batteries or the battery cartridge, and
contact your nearest dealer.
Failure to do so could cause smoke or fire.
For those machines using the dry battery cartridge, do not mistake
the plus and minus marks when loading dry batteries into the car-
tridge.
Failure to do so could cause battery-rupture or leakage of battery
fluid, resulting in bodily injury, fire, or property damage.
For those machines using the dry battery cartridge, do not use any-
thing other than the specified type of batteries, nor use new and old
batteries together.
Doing so could cause battery-rupture or leakage of battery fluid,
resulting in bodily injury, fire, or property damage.
Do not use batteries or power sources other than the specified ones;
doing so could generate heat or cause malfunction.
In environments where static electricity can build into significant
charges (e.g., if you wipe off the resin plate with a dry cloth), do not
operate the BHT. Doing so will result in malfunction or machine
failure.
When connecting or disconnecting the direct-connect interface cable
to/from the BHT, do not plug or unplug it at an angle and do not pull
the cable strongly. Doing so will result in a machine failure.
If the BHT has been stored in a hot (50˚C to 60˚C, 122˚F to 140˚F) and
humid place, allow it to sit at room temperature and humidity for at
least one day before use. Using the BHT with its inside being hot will
fail to scan or result in a machine failure.
Do not
drop
me!