Denso BHT-7000 Scanner User Manual


 
104
4.1 System Errors
If some error occurs when the power is turned on or during program execution, one of
the following error messages will appear on the LCD.
******************
** No System! **
******************
Battery voltage
has lowered.
Low battery indication—Level 1
Problem
When the power is turned on or off or during ex-
ecution of program (System Mode or application),
the battery output level has dropped below a
specified lower level limit.
If low battery is detected, the BHT-7000
displays this message for approx. 2 seconds
and beeps three times (for 0.1 second per
beep). After that, it will resume previous
regular operation.
Solution
The service life of the battery cartridge will expire
soon, requiring replacement or recharge.
If the BHT-7000 is loaded with the rechargeable
battery cartridge, replace or charge it. (For the
charging procedure, refer to Chapter 5, Section
5.5.)
If the BHT-7000 is loaded with the dry battery car-
tridge, replace the dry cells.
System Program error
Problem
A System Program error has occurred.
If this error occurs, the BHT-7000 beeps five
times (for 0.1 second per beep) and then turns
itself off.
Solution
Contact your nearest dealer.