Filter
Top Products
27
Chapter 2. Getting Started the BHT-7000 and System Mode
2.4.4 Battery Replacement Notes
■ When is battery replacement needed?
If the "Charge the battery!" or "Replace the batteries!" appears on the LCD, replace the
battery cartridge with a fully charged one or replace the dry batteries with new ones,
respectively.
If you leave the BHT-7000 without replacing the battery cartridge, the integrated
calendar clock or data will no longer be backed up so that the calendar clock will stop
or the "Contact your administrator. Note the error number. (XXXX)" will appear on the
LCD.
Be sure to power off the BHT-7000 before battery replacement.
Replace the battery cartridge quickly. Load a charged battery cartridge or new dry
batteries within 3 minutes after the removal in order to avoid data loss.
After battery replacement, power on the BHT-7000 and check its operation.
■ If you will use the BHT-7000 more than one time per month:
Keep the battery cartridge loaded in the BHT-7000.
■ If you will not be using the BHT-7000 for more than one month:
Remove the battery cartridge from the BHT-7000 and then store the BHT. To do so, be
sure to follow the procedure given below.
(1) When removing the battery cartridge:
Press the PW key for more than 3 seconds to power off the BHT-7000.
The following message will appear on the LCD and the BHT will start backing up
data. After completion of the backup operation so that the message disappears,
remove the battery cartridge.
(The backup operation may take several tens of seconds depending upon the
volume of data to be backed up.)
Shows the current
backup state in
progress.
Shows the total volume
of data to be backed up.
Now saving data.
Do not remove
batteries until
saving process
complete.