Filter
Top Products
46
If an error occurs during uploading
If some error occurs during uploading, one of the following screens will appear and
the beeper beeps three times.
To retry the uploading operation, press the 1 and ENT keys; to abort it, press the
2 and ENT keys.
■ Problem
The file you attempted to upload is damaged.
■ Solution
To upload the damaged file as is, press the 1 key.
■ Problem
Uploading has failed.
■ Solution
To retry uploading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key.
Check the interface port and communications pa-
rameters in the SET SYSTEM menu or perform the
communications test in the TEST menu. (Refer to
Subsection 2.6.3, [4.5] and [5.7].)
It is also necessary to check the communications
parameters setup of the host computer.
UPLOAD FILE
SAMPLE01.PD3
** Completed **
UPLOAD FILE
File error!!
Upload?
1:Yes 2:No
UPLOAD FILE
XXXXXXXX.XXX
Communication error!!
Retry?
1:Yes 2:No
Upon completion of uploading, the number of sent
records becomes equal to the total number of
records and the beeper beeps once. Press the C
key to return to the UPLOAD menu.
If you have selected "2:ALL FILES" or "3:HT<-->HT
COPY" on the UPLOAD menu, a sequence of the
above screens will be repeated by the number of
files to be uploaded.