Filter
Top Products
33
Chapter 2. Getting Started the BHT-7000 and System Mode
2.6 Operating in System Mode
System Mode is an operating software exclusively designed for the effective use of the
BHT-7000, which includes various functions as shown on the following pages.
2.6.1 Starting System Mode
To start up System Mode, power on the BHT-7000 while holding down the SF and 1
keys. This operation calls up the SYSTEM MENU on the LCD as shown below.
The function selected is highlighted (white-on-black) with the cursor. To select a
desired item in System Mode, press the corresponding numerical key and then press
the ENT key.
The keys below are so designed that the function of each key is consistent in every
screen.
Numerical keys Pressing a numerical key corresponding with a desired
menu number selects the desired item displayed on the
screen.
ENT key Pressing this key registers the selected item and executes
the corresponding function.
Pressing the
and keys ( F5 and F6 keys) moves
the cursor up and down, respectively, to select a desired
item.
Pressing the and keys ( F7 and F8 keys) moves
the cursor to the left and right, respectively, to select a
desired setting.
The C key is inoperative on the SYSTEM MENU. On other screens, pressing the C
key returns to the immediately preceding screen.
The power-on default is "EXECUTE PROGRAM" which is highlighted. Once any other
item is selected, the selected item will become highlighted with the cursor when you
turn back to the SYSTEM MENU.
and keys on
the 32-key pad
( F5 and F6 keys
on the 26-key pad)
and keys
on the 32-key pad
( F7 and F8 keys
on the 26-key pad)
SYSTEM MENU
1:EXECUTE PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST
6:VERSION