Denso BHT-7000 Scanner User Manual


 
77
Chapter 2. Getting Started the BHT-7000 and System Mode
DOWNLOAD
Out of memory!!
Retry?
1:Yes 2:No
DOWNLOAD
File mismatch!!
Retry?
1:Yes 2:No
DOWNLOAD
Too many files!!
Retry?
1:Yes 2:No
DOWNLOAD
__BHT/SYS
Communication error!!
Retry?
1:Yes 2:No
If an error occurs during downloading
If some error occurs during downloading, the BHT-7000 beeps three times and shows
one of the following screens with the prompt "Retry?":
To retry the download, press the 1 and ENT keys; to abort it, press the 2 and
ENT keys.
To return to the SYSTEM PARAMETER menu, press the C key.
Problem
The memory is insufficient for storing the BHT
system parameter file to be downloaded.
Solution
Press the 2 key to return to the SYSTEM MENU,
then delete unnecessary files in the memory. (Re-
fer to Subsection 2.6.3, [ 7 ] .)
Problem
The current download will exceed the maximum
of 80 files in the memory.
Solution
Press the 2 key to return to the SYSTEM MENU,
then delete unnecessary files in the memory. (Re-
fer to Subsection 2.6.3, [ 7 ].)
Problem
Downloading has failed.
Solution
To retry downloading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key.
Check the interface port and communications pa-
rameters in the SET SYSTEM menu or perform the
communications test in the TEST menu. (Refer to
Subsection 2.6.3, [4.5] and [5.7].)
It is also necessary to check the communications
parameters setup of the host computer.
Problem
You attempted to download a file other than the
BHT system parameter file.
Solution
Check whether the file you attempted to download
is the BHT system parameter file.