Denso BHT-7000 Scanner User Manual


 
106
Set the current
date and time.
00/01/01 00:00
_ / / :
Reload the battery
to restart!
XXXXXXXX 01
Reload the battery
to restart!
tskid:XXXXXXXX
ercd :XXXXXXXX
addr :XXXXXXXX 02
Calendar clock stopped
Problem
The calendar clock integrated in the BHT-7000 has
stopped because:
- The battery cartridge had been removed for a
long time,
- The rechargeable battery cartridge had not been
recharged for a long time, or
- The dry batteries in the dry battery cartridge had
not been replaced.
The indication of 00/01/01 00:00 will change
depending upon the calendar clock state.
Solution
Set the calender clock (refer to Chapter 2, Subsec-
tion 2.4.2).
System Program malfunction
Problem
During execution of System Program, the System
Program has attempted to write onto the write-pro-
tected area of the memory.
(xxxxxxxx: Error address)
If this error occurs, the BHT-7000 beeps five
times (for 0.1 second per beep).
Solution
Unload and reload the battery cartridge, then turn
on the power.
Problem
During execution of System Program, the System
Program has received an invalid command code.
(xxxxxxxx: Error address)
If this error occurs, the BHT-7000 beeps five
times (for 0.1 second per beep).
Solution
Unload and reload the battery cartridge, then turn
on the power.