Filter
Top Products
Installation and Setup
98
Site Preparation - IMG 1004
Topic Location: IMG 1004-Installation and Setup Guide > IMG 1004-Hardware
Installation
Ensure that the following requirements are met before you begin installation.
Important: Any variances from the mutually agreed upon site preparation
details (such as power cabling, network cabling, equipment room readiness) may
affect installation scheduling.
Site Preparation Checklist
Requirements Completed
Location
Spacing
Mounting
Power
Electromagnetic Interference
Channel Service Units
Electrostatic Discharge
Protection
Location
The 120/240 V AC unit does not have to be located in a restricted area. It can be
located in a clean and well ventilated office space.
Spacing
There are no spacing requirements.
Mounting
The IMG 1004 can be mounted in a 19-inch rack. The mounting brackets can be
mounted at either the front or the rear of the IMG 1004 chassis.
If mounting multiple IMG 1004's in a rack, ensure that
a hazardous condition does not exist due to uneven
mechanical loading.
Avoid mounting inside a cabinet with closed doors
unless you can provide sufficient ventilation inside the
cabinet. Elevated operating ambient conditions may
occur in an enclosed equipment rack. The operating
ambient temperature may be greater than the room
temperature.
Do not block the front of the chassis doing so can cause
the unit to overheat.