Filter
Top Products
Installation and Setup
28
Redundant Signaling - IMG 1010
Topic Location: IMG 1010-Installation and Setup Guide > IMG 1010-Hardware
Installation
The following illustration shows the cabling for redundant VoIP signaling.
Redundant Signaling
1. The SIG0 and SIG1 ports are used for communication between the IMG 1010
and the IP network.
Ports SIG0 and SIG1 are used for SIP or H.323 Signaling.
An IP address shared by SIG0 and SIG1 for redundancy is configured in
Clientview.