Filter
Top Products
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
LLDP Dot3 TLVs Settings
This window is used to configure an individual port or group of ports to exclude one or more IEEE 802.3 organizational
specific TLV data type from outbound LLDP advertisements.
To view this window, click L2 Features > LLDP > LLDP Dot3 TLVs Settings:
Figure 3 - 54. LLDP Dot3 TLVs Settings window
The following parameters can be set:
Parameter Description
From Port / To Port
Use the drop-down menu to select a range of ports to be configured.
MAC/PHY
Configuration
Status
This TLV optional data type indicates that the LLDP agent should transmit 'MAC/PHY
configuration/status TLV'. This indicates it is possible for two ends of an IEEE 802.3 link to be
configured with different duplex and/or speed settings and still establish some limited network
connectivity. More precisely, the information includes whether the port supports the auto-
negotiation function, whether the function is enabled, whether it has auto-negotiated
advertised capability, and what is the operational MAU type. The default state is Disabled.
Link Aggregation
The Link Aggregation option indicates that LLDP agents should transmit 'Link Aggregation
TLV'. This indicates the current link aggregation status of IEEE 802.3 MACs. More precisely,
the information should include whether the port is capable of doing link aggregation, whether
the port is aggregated in an aggregated link, and what is the aggregated port ID. The default
state is Disabled.
Maximum Frame
Size
The Maximum Frame Size indicates that LLDP agent should transmit 'Maximum-frame-size
TLV. The default state is Disabled.
Click Apply to implement changes made.
104