D-Link 28F Switch User Manual


 
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Appendix B
System Log Entries
The following table lists all possible entries and their corresponding meanings that will appear in the System Log of
this Switch.
Category Event Description Log Information Severity
system System warm start [Uint <unitID>,] System warm start Critical
System cold start [Uint <unitID>,] System cold start Critical
Configuration saved to
flash
[Unit <unitID>,] Configuration saved to flash (Username:
<username>)
Informational
System log saved to flash [Unit <unitID>,] System log saved to flash (Username:
<username>)
Informational
Configuration and log
saved to flash
[Unit <unitID>,] Configuration and log saved to
flash(Username: <username>)
Informational
Internal Power failed [Unit <unitID>,] Internal Power failed Critical
Internal Power is recovered [Unit <unitID>,] Internal Power is recovered Critical
Redundant Power failed [Unit <unitID>,] Redundant Power failed Critical
Redundant Power is
working
[Unit <unitID>,] Redundant Power is working Critical
Access flash failed [Unit <unitID>,] Access flash failed (operation:
<operation>, physical address: <address>)
Warning
Temperatrue sensor alarms [Unit <unitID>,] Temperatrue sensor <sensorID> enters
alarm state(threshold: <temperature>)
Warning
Temperatrue sensor
recoveries
[Unit <unitID>,] Temperatrue sensor <sensorID> enters
normal state(threshold: <temperature>)
Informational
up/down-load Firmware upgraded
successfully
[Unit <unitID>,] Firmware upgraded by console
successfully (Username: <username>)
Informational
Firmware upgrade was
unsuccessful
[Unit <unitID>,] Firmware upgrade by console was
unsuccessful! (Username: <username>)
Warning
Configuration successfully
downloaded
Configuration successfully downloaded by
console(Username: <username>)
Informational
Configuration download
was unsuccessful
Configuration download by console was unsuccessful!
(Username: <username>)
Warning
Configuration successfully
uploaded
Configuration successfully uploaded by console
(Username: <username>)
Informational
Configuration upload was Configuration upload by console was unsuccessful! Warning
226