Filter
Top Products
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
IPv6 Flow Label
Ticking this check box will instruct the Switch to examine the flow label field of the IPv6
header. The flow label field is used by a source to label sequences of packets such as non-
default quality of service or real time service packets.
IPv6 Address
Ticking this check box will instruct the Switch to examine the IPv6 Source Address.
IPv6 TCP
Ticking this check box will specify that the rule applies to TCP traffic.
The user can tick and enter a specific TCP Source Port Mask or TCP Destination Port Mask.
IPv6 UDP
Ticking this check box will specify that the rule applies to UDP traffic.
The user can tick and enter a specific UDP Source Port Mask or UDP Destination Port
Mask.
Click Apply to implement changes made.
Click Create to view the new Access Profile List entry in the Access Profile List window shown below. To add
another Access Profile, click Add ACL Profile. To delete a profile click the corresponding Delete button. To view the
specific configurations for an entry click, the Show Details button. To add a rule to the Access Profile entry, click the
Add/View Rules button.
Figure 6 - 17. Access Profile List window for IPv6 example
To view the configurations for a previously configured entry, click on the corresponding Show Details button, which
will display the following window:
Figure 6 - 18. Access Profile Detail Information window for IPv6 example
To return to the Access Profile List window, click Show All Profiles. To add a rule to a previously configured entry,
click on the corresponding Add/View Rules button and then click Add Rule on the Access Rule List window, which
will reveal the following window:
161