Filter
Top Products
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Help
y About - Will display the SIM information, including the current SIM version.
Figure 2 - 55. About window
Firmware Upgrade
This window is used to upgrade firmware from the Commander Switch to the Member Switch. Member Switches will
be listed in the table and will be specified by ID and Port (port on the CS where the MS resides), MAC Address, Model
Name and Firmware Version. To specify a certain Switch for firmware download, click its corresponding check box
under the Port heading. To update the firmware, enter the Server IP Address where the firmware resides and enter
the Path/Filename of the firmware. Click Download to initiate the file transfer.
To access the following window, click Configuration > Single IP Management > Firmware Upgrade:
Figure 2 - 56. Firmware Upgrade window
Configuration File Backup/Restore
This window is used to upgrade configuration files from the Commander Switch to the Member Switch using a TFTP
server. Member Switches will be listed in the table and will be specified by ID, Port (port on the CS where the MS
resides), MAC Address, Model Name and Firmware Version. To update the configuration file, enter the Server IP
Address where the file resides and enter the Path/Filename of the configuration file. Click Restore to initiate the file
transfer from a TFTP server to the Switch. Click Backup to backup the configuration file to a TFTP server. To access
the following window, click Configuration > Single IP Management > Configuration File Backup/Restore:
Figure 2 - 57. Configuration File Backup/Restore window
53