D-Link 28F Switch User Manual


 
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
RADIUS Authentication
This table contains information concerning the activity of the RADIUS authentication client on the client side of the
RADIUS authentication protocol.
To view the RADIUS Authentication window, click Monitoring > Port Access Control > RADIUS Authentication:
Figure 7 - 17. RADIUS Authentication window
The user may also select the desired time interval to update the statistics, between 1s and 60s, where “s” stands for
seconds. The default value is one second. To clear the current statistics shown, click the Clear button in the top left
hand corner.
The following information is displayed:
Parameter Description
InvalidServerAddresses
The number of RADIUS Access-Response packets received from unknown addresses.
Identifier
The NAS-Identifier of the RADIUS authentication client. (This is not necessarily the same
as sysName in MIB II.)
ServerIndex
The identification number assigned to each RADIUS Authentication server that the client
shares a secret with.
AuthServerAddress
The (conceptual) table listing the RADIUS authentication servers with which the client
shares a secret.
ServerPortNumber
The UDP port the client is using to send requests to this server.
RoundTripTime
The time interval (in hundredths of a second) between the most recent Access-
Reply/Access-Challenge and the Access-Request that matched it from this RADIUS
authentication server.
AccessRequests
The number of RADIUS Access-Request packets sent to this server. This does not
include retransmissions.
AccessRetransmissions
The number of RADIUS Access-Request packets retransmitted to this RADIUS
197