D-Link 28F Switch User Manual


 
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Enter the appropriate information and click Find. The searched entries will be shown in the IGMP Snooping Group
Table. Click View All to see all the entries.
Click View All Data Driven to display all the data driven groups learned in the IGMP Snooping Group Table.
Click Clear Data Driven to clear the specific data driven groups learned in IGMP Snooping Group Table.
Click Clear All Data Driven to clear all data driven groups learned in IGMP Snooping Group Table.
NOTE: To configure IGMP snooping for the Switch, go to the L2 Features folder and
select IGMP Snooping > IGMP Snooping Settings.
IGMP Snooping Host
This window displays current IGMP Snooping host information on the Switch.
To view this window, click Monitoring > IGMP Snooping > IGMP Snooping Host:
Figure 7 - 27. IGMP Snooping Host window
Click the corresponding radio button, enter the VLAN Name, VLAN List, Port List, or the Group to view IGMP snooping
host information, and click Find. The searched entries will be displayed in the lower half of the window.
MLD Snooping
Browse MLD Router Port
This window displays which of the Switch’s ports are currently configured as router ports in IPv6. A router port
configured by a user (using the console or Web-based management interfaces) is displayed as a static router port,
designated by S. A router port that is dynamically configured by the Switch and is designated by D, whereas a
Forbidden port is designated by F. Enter a VID (VLAN ID) in the field at the top of the window and click the Find
button to display the various types of MLD router ports that beliong to the specified VLAN.
To view this window, click Monitoring > MLD Snooping > Browse MLD Router Port:
208