Filter
Top Products
xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Figure 6 - 12. Access Profile Detail Information window for IPv4 example
To return to the Access Profile List window, click Show All Profiles. To add a rule to a previously configured entry,
click on the corresponding Add/View Rules button, and then click Add Rule on the Access Rule List window, which
will reveal the following window:
Figure 6 - 13. Add Access Rule window for IPv4 example
The following parameters may be configured for the IP (IPv4) filter:
Parameter Description
Access ID (1-65535)
Type in a unique identifier number for this access. This value can be set from 1 to 65535.
VLAN Name
Specifies a VLAN name.
VLAN ID (1-4094)
Mask ____ (0-FFF) – Specifies a VLAN ID.
Source IP Address
Specifies an IP address for the source IP address.
Source IP Mask
Specifies an IP address mask for the source IP address.
Destination IP
Address
Specifies an IP address for the destination IP address.
Destination IP Mask
Specifies a destination IP address mask for the destination IP address.
DSCP
Selecting this option instructs the Switch to examine the DiffServ Code part of each packet
header and use this as the criteria, or part of the criterion for forwarding.
ICMP
Select ICMP to instruct the Switch to examine the Internet Control Message Protocol (ICMP)
field in each frame's header.
ICMP Type - Specifies that the Switch will examine each frame’s ICMP Type field.
158