DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
120
Port Mapping Priority Settings
Use the Port Mapping Priority Settings menu to configure priority mapping for Class of Service on the
Switch. Port Mapping Priority CoS can only be used if it has been previously configured for the selected
ports in the Priority Setting menu. There are two Class of Service levels available. To view this table click,
CoS > Port Mapping Priority Settings
Figure 8- 10. Port Mapping Priority CoS
Use the From/To menu to select the ports being configured, the selected ports must first be configured for
port-based priority in the Priority Setting menu. Select the Class level for the port(s), there are two levels 3
for high priority and 0 for low priority.