DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
70
Firmware Upgrade
This screen is used to upgrade firmware from the Commander Switch to the Member Switch. Member
Switches will be listed in the table and will be specified by Port (port on the CS where the MS resides),
MAC Address, Model Name and Version. To specify a certain Switch for firmware download, click its
corresponding check box under the Port heading. To update the firmware, enter the Server IP Address
where the firmware resides and enter the Path/Filename of the firmware. Click Download to initiate the file
transfer. To access the following window, click Administration > Single IP Setting> Firmware Upgrade
Figure 6- 53. Firmware Upgrade window
Configuration File Backup/Restore
This screen is used to upgrade configuration files from the Commander Switch to the Member Switch using
a TFTP server. Member Switches will be listed in the table and will be specified by Port (port on the CS
where the MS resides), MAC Address, Model Name and Version. To specify a certain Switch for
upgrading configuration files, click its corresponding radio button under the Port heading. To update the
configuration file, enter the Server IP Address where the file resides and enter the Path/Filename of the
configuration file. Click Download to initiate the file transfer from a TFTP server to the Switch. Click
Upload to backup the configuration file to a TFTP server. To access the following window, click
Administration > Single IP Setting> Configuration File Backup/Restore
Figure 6- 54. Configuration File Backup/Restore window
Upload Log File
The following window is used to upload log files from SIM member switches to a specified PC. To upload a
log file, enter the IP address of the SIM member switch and then enter a path on your PC where you wish to
save this file. Click Upload to initiate the file transfer. To view this window click Administration > Single
IP Setting > Upload Log File