Filter
Top Products
DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
129
The following window is the CPU Interface Filtering Rule Table for IP.
Figure 9- 10. CPU Interface Filtering Rule Table – IP
To create a new rule set for an access profile click the Add button. A new window is displayed. To remove a
previously created rule, click the corresponding
button. The following window is used for the IP Rule
configuration.
Figure 9- 11. CPU Interface Filtering Rule Configuration – IP
Configure the following Access Rule Configuration settings for IP:
Parameter Description
Profile ID
This is the identifier number for this profile set.
Mode
Select Permit to specify that the packets that match the access profile are forwarded by the
Switch, according to any additional rule added (see below).
Select Deny to specify that packets that match the access profile are not forwarded by the
Switch and will be filtered.
Access ID
Type in a unique identifier number for this access. This value can be set from 1 - 5.
Type
Selected profile based on Ethernet (MAC Address), IP address or Packet Content.
• Ethernet instructs the Switch to examine the layer 2 part of each packet header.
• IP instructs the Switch to examine the IP address in each frame's header.