Filter
Top Products
DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
57
ports, the ports must first be enabled in the IP-MAC Binding Ports menu (see above). The ports are
specified in the Port field as a range of integers (for example “1-3”) or select the All option to apply to all
ports.
To view this table, click Administration > IP-MAC Binding > IP-MAC Binding Table
Figure 6- 33. IP-MAC Binding Table menu
The Address Binding Trap Log Settings field will enable and disable the sending of trap log messages for
IP-MAC binding. When enabled, the Switch will send a trap log message to the SNMP agent and the Switch
log when an ARP packet is received that doesn’t match the IP-MAC binding configuration set on the
Switch.
To modify either the IP address or the MAC address of the binding entry, make the desired changes in the
appropriate field and Click Modify. To find an IP-MAC binding entry, enter the IP and MAC addresses and
click Find. To delete an entry click Delete. To clear all the entries from the table click Delete All.