DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
ix
Preface
The DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 User Manual is divided into
sections that describe the system installation and operating instructions with examples.
Section 1, Introduction - Describes the Switch and its features.
Section 2, Installation- Helps you get started with the basic installation of the Switch and also describes the
front panel, rear panel, side panels, and LED indicators of the Switch.
Section 3, Connecting the Switch - Tells how you can connect the Switch to your Ethernet network.
Section 4, Introduction to Switch Management - Introduces basic Switch management features, including
password protection, SNMP settings, IP address assignment and connecting devices to the Switch.
Section 5, Introduction to Web-based Switch Management – This section discusses connecting to and
using the Web-based switch management feature on the Switch.
Section 6, Administration- A detailed discussion about configuring some of the basic functions of the
Switch, including accessing the Switch information, using the Switch's utilities and setting up network
configurations, such as assigning an IP address, Port Configurations, User Accounts, Password Encryption,
Cable Diagnostics, Port Mirroring, System Log Settings, SNTP Settings, MAC Notification Settings, TFTP
Services, Ping Test, SNMP Manager, IP-MAC Binding, Single IP Setting, Forwarding & Filtering, SMTP
Service and DHCP/BOOTP Relay.
Section 7, L2 Features - A discussion of the layer 2 features of the Switch, including Static VLAN Entry,
VLAN Trunk Settings, Trunking, IGMP Snooping, Spanning Tree and Loopback Detection.
Section 8, CoS - A detailed discussion regarding Port Bandwidth, 802.1p Default Priority, 802.1p User
Priority, CoS Scheduling Mechanism, CoS Output Scheduling, Priority Settings, TOS Priority Settings,
DSCP Priority Settings, Port Mapping Priority Settings and MAC Priority.
Section 9, CPU Interface Filtering – This section deals with the CPU Interface Filtering features on this
Switch, including CPU Interface Filtering State and CPU Interface Filtering Table.
Section 10, Security – A detailed discussion about the security features on the Switch including Traffic
Control, Port Security, Port Lock Entries, 802.1X, Trusted Host, Traffic Segmentation and SSH.
Section 11, Monitoring - Features graphs and screens used in monitoring features and packets on the
Switch including CPU Utilization, Port Utilization, Packers, Packet Errors, Packet Size, VLAN Status,
MAC Address, Switch Log, Log Settings, IGMP Snooping Group, Browse Router Port, Browse ARP Table
and Session Table.
Appendix A, Technical Specifications – This discusses the technical specifications of the DES 3016, DES-
3010F, DES-3010FL, DES-3010G, DES-3018 and DES-3026 switches.
Appendix B, Cables and Connectors - Describes the RJ-45 receptacle/connector, straight-through and
crossover cables and standard pin assignments.
Appendix C, Cable Lengths – Gives information on cable types and maximum distances.
Glossary - Lists definitions for terms and acronyms used in this document.