Filter
Top Products
DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
152
Configure 802.1X Guest VLAN
To set a Guest 802.1X VLAN, the user must first configure a normal VLAN which can be enabled here for
Guest VLAN status. To view this window, click Security > 802.1X > Configure 802.1X Guest VLAN,
which will display the following window for the user to configure.
Figure 10- 17. Guest VLAN Configuration window
The following fields may be modified to enable the guest 802.1X VLAN:
Parameter Description
VLAN Name
Enter the pre-configured VLAN name to create as a Guest 802.1X VLAN. Click the Delete check
box to remove the selected VLAN from being an 802.1X Guest VLAN.
Operation
The user has three choices in configuring the Guest 802.1X VLAN, which are:
Enabled– Selecting this option will enable ports listed in the Port List below, as part of the Guest
VLAN. Be sure that these ports are configured for this VLAN or users will be prompted with an
error message.
Disabled - Selecting this option will disable ports listed in the Port List below, as part of the
Guest VLAN. Be sure that these ports are configured for this VLAN or users will be prompted
with an error message.
Delete – Selecting this option will delete the VLAN entered in the VLAN Name window above.
Port List
Set the port list of ports of switches in the switch stack to be enabled for the Guest 802.1X VLAN
using the pull down menus.
Click Apply to implement the guest 802.1X VLAN settings entered. Only one VLAN may be assigned as
the 802.1X Guest VLAN.