Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
Web-Based Network Management 109
Figure 7-12. Add / Modify Static Multicast Forwarding Table Entry window
To Add / Modify to the table or Delete from the table, check the desired option button, enter the MAC address in
the MAC Address field, enter the VLAN ID in the Vid field (if IEEE 802.1Q VLANS is selected), enable or disable the
Allow dynamic updates via IGMP Snooping function, and select Block or Forward for each port. Click Apply to
let the changes take effect.
The information above is described as follows:
♦ Add/Modify to the table Allows you to create or edit a filter for the Static Multicast Forwarding
Table which will either forward or block multicast traffic.
♦ Delete from the table Allows you to delete a filter from the Static Multicast Forwarding Table.
♦ MAC Address The Ethernet address of the Static Multicast Forwarding Table entry. Only valid
Multicast addresses will be added to the table.
♦ Vid This is the VLAN that will be defined on this screen. Note a VLAN ID is from 1 to 4094.
♦ Allow dynamic updates via IGMP Snooping Enable this function to tell the switch how to deal with the
newly-created Static Multicast Forwarding table entry.
♦ Port Choose Block or Forward for each individual port.