Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
Web-Based Network Management 127
Console Port Settings
Figure 7-29. Console Port Settings window
This window allows you to select the protocol for communicating through the console port, Console or SLIP, in the
Port Setting field. Use SLIP for out-of-band management. You can also choose the refresh rate in the Console
Time Out field (2 minutes, 5 minutes, 10 minutes, 15 minutes or Never). If SLIP is being used, you may also set
the Baud Rate in the last field. Click Apply and then reboot the Switch for console port settings to take effect.
The default serial port settings are:
Baud Rate=9600
Data Bits=8
Flow Control=X on/X off
Parity=None
Stop Bits=1
The information is described as follows:
♦ Port Settings The options for the current console port setting are Console or SLIP.
♦ Console Time Out Choose Never, 2 minutes, 5 minutes, 10 minutes, or 15 minutes for the desired refresh
setting.