Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
66 Using the Console Interface
To view the VLANs & MAC-based Broadcast Domains Configuration menu for MAC-based Broadcast
Domains:
1. Choose Configure VLANs & MAC-based Broadcast Domains on the Configuration menu.
2. Select IEEE 802.1Q VLANs under Restart Mode and then press APPLY.
3. Press RESTART on the Change VLAN Mode screen. This will cause the Switch to automatically save changes and
then perform a reboot.
4. Repeat the first step. The following screen will appear:
Figure 6-38. VLANs & MAC-based Broadcast Domains Configuration menu for IEEE 802.1Q VLANs
Choose Configure IEEE 802.1Q VLANs on the screen above (under Configure VLANs & MAC-based
Broadcast Domains of the Configuration menu) to access the IEEE 802.1Q VLANs Configuration menu: