Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
Using the Console Interface 75
Figure 6-46B. Static Multicast Forwarding Table screen
To add an entry or make a change to an entry on the Static Multicast Forwarding Table, select Add or Remove in
the first field, enter the multicast MAC address in the next field, assign the outgoing ports by typing a “V”, and then press
APPLY to put the changes into effect.
Configure Trunk
Ports on the Switch can be grouped together in a single logical port called a trunk. This is discussed in detail in the Port
Trunking section of the Switch Management Concepts chapter of this manual.
To setup a trunk group, choose Configure TRUNK in the Configuration menu. The following screen appears: