24-port NWay Ethernet Switch User’s Guide
144 Web-Based Network Management
Update Firmware
Figure 7-45. Update Firmware window
To update firmware, fill in the requested information above and then click the Apply button.
The information is described as follows:
♦ Software Update Mode is Set to either Network or SLIP. Determines whether the new firmware code
should be obtained through the Ethernet network or through the console port.
♦ TFTP Server Address The IP address of the TFTP server where the new firmware code is.
♦ Firmware Update Determines whether or not the Switch should replace its switching software the next time
it is rebooted.
♦ File Name The path and the name of the file which holds the new firmware code on the TFTP server.